FLOW-3D is a commercial software for analyzing molten flow in the injection chamber and mold cavity. Using FLOW-3D, melt filling patterns in mold cavities, crystalline defects, freezing processes, and so forth are predictable. Flow 3D software is one of the most powerful software in the field of hydraulic and water engineering, based on computational fluid dynamics (CFD).
FLOW-3D CAST Advanced is a powerful CFD or casting software. This software is designed to help investigate the dynamic behavior of liquids and gases in a wide range of applications. You can use this software to predict the flow pattern of the fluid for different molybdenum in the mold cavity channel and also to predict the blocked sections of the injection channel (ESP) for different temperature and temperature conditions. By modeling a Flagship, it can be seen that Flow-3D can easily perform the Flare-Up Flow calculations under both free and submerged flows. The calculated results are well matched to the published fluxes and require a lot of time and using the cloud. Computers can not do much research on the subject. For example, the influence of input conditions (such as fluctuation due to the change in direction of weight) or the effect of changes in the shape and size of different flome areas (such as adding a section and Theory) easily with the software. FLOW-3D CAST helps with engineers and users to conduct casting experiments with specialized tools. The software has a simple, easy-to-use interface, which also has a very high 3D power to solve problems. FLOW-3D CAST helps with engineers and users to conduct casting experiments with specialized tools. The software has a simple, easy-to-use interface, which also has a very high 3D power to solve problems. FLOW-3D CAST helps with engineers and users to conduct casting experiments with specialized tools. The software has a simple, easy-to-use interface, which also has a very high 3D power to solve problems.
FLOW-3D Cast is designed specifically for modeling a wide range of casting processes and includes the relevant components required to provide a complete design solution. It combines an intuitive user interface that uses a progressive approach to guide users to completion with the powerful FLOW-3D solver to deliver accurate predictions of defects in filling and deflation. FLOW-3D Cast is available in three pack levels so that companies with varying needs can select the product most appropriate for their process and their budget.
FLOW-3D Cast consists of a full-flow and thermal solution for both cast alloy and die or mold. Simulations of filling and solidification using FLOW-3D Cast provides important insights into the casting process. This understanding helps to identify problems with a design to increase the yield and reduce the time required for physical design iterations. All this leads to the production of quality parts in less time, resulting in greater customer satisfaction and profit. As a versatile simulation tool, FLOW-3D Cast can also enable companies to save time when deploying new casting processes or alloys.
Features:
- Continuous casting with binary segregation
- Capture core gas release and associated defects
- Sand core blowing
- Model moisture drying in molds and cores
- Enhanced viscous effects including non-Newtonian viscosity, shear thinning / thickening and thixotropic flows.
- Heating due to viscous shear.
- Thermal and mechanically induced stresses and distortions.
RP. 20.000
Untuk pemesanan
CP: 0852 9344 9244
Whatsapp : 085728247080
Silahkan Kunjungi :
Auror@ Rental
Facebook: http://www.facebook.com/aurora.rental
Comments
Post a Comment